39
SETUP Setup SETUPSETUP SETUPSETUP

Digital TV Set-Top

Box with

Component

Video Connectors

To connect a digital TV set-top box with component video connectors
1Use three separate component video cables to connect the DVD
players Y, PB and PR jacks to the Y, PB and PR jacks (VIDEO 5) on
the TV.

2

Use an audio cable to connect the set-top boxs audio output jacks
to the TVs VIDEO 5 audio input jacks.
Notes on Using This Connection
The Y, PB and PR jacks on your DVD player are sometimes labeled Y,
CB and CR, or Y, B-Y and R-Y. If so, connect the cables to like colors.
To Do This ... Do This ...
Watch the digital TV set-top
box
Press TV/VIDEO repeatedly to select the digital TV set-top bo x input (VIDEO 5
in the illustration).
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on pages 83-84.
Component video cables
Audio cable
TV
Digital TV Set-Top Box
Cables are often
color-coded to connectors.
Connect red to re d,
white to white, etc.
You cannot record the signal from any equipment connected into the Y, PB,
PR jacks.
DA4X.book Page 3 9 Tuesday, April 23, 2002 2:48 PM