5Press CHANNEL + to preset channels automatically.

+

 

CHANNEL

AUTO PROGRAM

–

 

“AUTO PROGRAM” appears and the projection TV starts scanning and presetting channels automatically. While scanning, the received channel will be displayed on the sub screen. When all the receivable channels are stored, the lowest numbered channel will be displayed.

If your projection TV is not connected to a cable system

If you perform AUTO SET UP, CABLE is set to ON automatically. After finishing AUTO SET UP, set CABLE to OFF in the CHANNEL SET UP menu, then set AUTO PROGRAM to YES to perform automatic channel presetting. (see “CABLE” and “AUTO PROGRAM” on page 38)

To perform AUTO SET UP again

•Press SET UP inside the lower front panel on the projection TV, and perform steps 3-5 on page 23.

•Press CHANNEL +, CHANNEL – or VOLUME + to select a language.

•Press VOLUME – to restore factory settings (“CONTINUE TO AUTO PROGRAM?” will appear on the screen. Press CHANNEL + to execute or CHANNEL – to exit).

24 • Press SET UP to exit.

Adjusting the

Convergence

Automatically (FLASH

FOCUS)

The projection tube image appears on the screen in three layers (red, green and blue). If they do not converge, the color is poor and the picture blurs.

Before you use your projection TV, be sure to adjust the convergence.

The FLASH FOCUS feature allows you to adjust the convergence automatically.

Tip z

•It is recommended to perform FLASH FOCUS about 30 minutes after the projection TV is first turned on.

+

VOLUME

–

TV/VIDEO

FLASH FOCUS

1Receive a TV or cable TV program.

2Press FLASH FOCUS.

FLASH FOCUS

The cross pattern appears and FLASH FOCUS begins to work. The adjustment is completed when the cross pattern becomes white.

To obtain an optiimmuum convveerrgence

The optimum convergence alignment varies with digital TV formats. Therefore, perform FLASH FOCUS periodically on conventional and digital TV programs. Also, whenever you find that the picture blurs, press FLASH FOCUS.

Notes:

•You cannot perform any other functions until FLASH FOCUS has completed its cycle.

•If you perform any other operation while FLASH FOCUS is in progress, FLASH FOCUS operation is canceled.