Using the yellow labeled buttons for P&P operations

REFER TO THE ILLUSTRATION OF THE

REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THE FOLLOWING DESCRIPTIONS

Tip z

If you press RESET in P&P mode, the right and left pictures will be reset to the same size (factory-preset size.)

Press to display right (main) and left pictures.

Press (OFF) to close the sub picture.

ZOOM IN

or

LEFT RIGHT

Moving the joystick right or left will activate the same function.

LEFT

RIGHT

ACTIVE

CH

or 0 - 9 or JUMP

and ENTER

— (white labeled button)

Press to select the TV channel on which the symbol “b” (or “B”) is displayed. (for details, see “Watching the TV” on page 25)

ANT — (white labeled button)

Press to change between the VHF/UHF input and the AUX input for the picture on which the symbol “b” (or “B”) is displayed.

AUDIO

— (white labeled button)

Press and hold either RIGHT or LEFT to zoom in on the selected picture.

Release at the desired size. The other picture will be zoomed out simultaneously.

Press to select either the right or left picture in order to change the TV channel or video source using the white labeled buttons below. The symbol “b” (or “B”) will appear to indicate which picture’s channel or input mode can be changed.

TV/VIDEO — (white labeled button)

Press repeatedly to scroll through the available video inputs for the picture on which the symbol “b” (or “B”) is displayed. (see “TV/VIDEO” on page 26)

Press to alternate sound between the right and left pictures. The symbol “9” will appear for a few seconds to indicate which picture’s sound is being received.

FREEZE

This is useful when you need to copy down information that appears on the TV’s screen.

Press to freeze both the right and left pictures.

Press again to resume P&P viewing or press (OFF) to cancel and resume normal TV viewing.

30