—Customizes surround sound effects based on the program’s audio type
EFFECT can only be set when SPEAKER is set to ON.
TRUSURROUND*:Produces a virtual surround effect for Dolby- surround encoded programs.
SRS 3D MONO:Adds a
Normal stereo or mono reception.
SPEAKER— Custom selection of audio output sourceON:Select to listen to the sound from the projection TV speakers alone.
OFF:
Select to turn off the projection TV speakers and listen to the projection TV’s sound only through an external audio system’s speakers.
CENTER IN:Select to use the projection TV as center speaker when you connect an amplifier with a Dolby Pro Logic decoder. (see “Connecting an Amplifier That Supports Dolby Pro Logic Decoder” on page 21)
To restore the factory settings
Press RESET on the remote control while the AUDIO menu is selected.
* 
TruSurround, SRS and the 
symbol are trademarks of SRS Labs, Inc. in the United States and selected foreign countries.
TruSurround and SRS technology is incorporated under license from SRS Labs, Inc.
Using the TIMER Menu
TIMER
DAYLIGHT SAVING : NO
CURRENT TIME
ON / OFF TIMER
– – – | |
| |
Move | Select Exit MENU |
After setting the clock you can use the timer to turn the projection TV on and off.
For detailed information on using the remote control to modify menu settings, refer to “Learning Menu Selection” on page 33.
To select the TIMMEER
menenuu:Display | , Highlight | , Select |
MENU |
|
|
Tip z
Set daylight saving time before setting the clock. Any loss of power will cause these settings to be erased.
36