Operating a Cable Box or DBS Receiver

Setting the Manufacturer’s Code

You can program the supplied remote control to operate a cable box or DBS receiver.

Press CODE SET, DBS/CABLE (FUNCTION), and the 0-9 buttons to enter the manufacturer’s code number (see the following chart), then press

ENTER.

For example, to operate a Sony DBS receiver:

CODE SET

FUNCTION

 

ENTER

DBS/CABLE

0

 

8

1

Manufacturer code numbers (cable box)

Manufacturer

Code

Gemini

233

Hamlin/Regal

222, 223, 224, 225, 226

Jerrold/G. I.

201, 202, 203, 204, 205, 222,

 

206, 207, 208, 218

Macom

230, 231, 232

Magnavox

234

Oak

227, 228, 229

Panasonic

219, 220, 221

Philips

236, 237, 238, 239, 240, 241

Pioneer

214, 215

Samsung

235

Scientific Atlanta

209, 210, 211

Tocom

216, 217

Zenith

212, 213

Manufacturer code numbers (DBS receiver)

Manufacturer

Code

Sony

801 (preset code for remote

 

control)

General Electric

802

RCA/PROSCAN

802

If the remote conttrrool doessnn’’t woorrk

Try repeating the set up procedures using the other codes listed for your equipment.

To operate the prroojjececttiion TV

Press TV (FUNCTION). Then use the projection TV control buttons to control the projection TV.

Tips z

•If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment.

•If you enter a new code number, the code number you previously entered at that setting is erased.

•In some rare cases, you may not be able to operate your equipment with the supplied remote control. In this case, use the equipment’s own remote control unit.

•Whenever you remove the batteries — to replace them, for example — if too much time is taken, the code numbers may revert to the factory setting and must be reset.

Operations Additional

Operating a cable box or DBS receiver

1Press DBS/CABLE (POWER) [Green Button] to turn on/off the cable box or DBS receiver.

2Press DBS/CABLE (FUNCTION).

3For other operations, refer to the operating instructions that come with the equipment. Blue-labeled buttons such as the GUIDE

button can be used only with a DBS receiver.

55