Connecting optional components

You can connect optional audio/video components, such as a VCR, a DTV (Digital Television) receiver, multi disc player, camcorder, video game, or stereo system. To watch and oprate the connected equipment, see pages 17 and 31.

Connecting a camcorder/video game equipment using t 4 (video input 4) jacks

Front of projection TV

To open the drop- down panel of your projection TV, push it up until you hear a click, then it will slide down.

4

L(MONO) R

Video game equipment

To S video

To

 

 

output

(S video input)

 

4

 

 

L(MONO) R

Your Using

projection New

TV

or

Camcorder

S video cable (not supplied)

To t 4 (video input) (yellow)

-L (MONO) (white) -R (red)

Audio/Video cable (not supplied)

To video and

: Signal flow

 

audio outputs

 

Notes

•When connecting video game equipment, display the “Setup” menu and select “On” for “Game Mode” to adjust the picture setting that is suitable for video games (see page 46).

•You can also connect video equipment to the t 1, 2, or 3 (video input) jacks at the rear of your projection TV.

•When you connect video equipment to the S video input, display the “Setup” menu and select “Auto” for “S Input” (see page 47). If the signals

are input to both (S video input) and (video input), the S video signal is automatically selected. To view the video signal input to (video input), select “Off” for “S Input”.

continued

Using Your New Projection TV 11