Adjusting the convergence
(CONVERGENCE)
Before you use the projection TV, adjust convergence. The projection tube image appears on the screen in three layers (red, green and blue). If they do not converge, the color is poor and the picture blurs. To correct this, adjust convergence.
After
Adjusting the convergence automatically
R | ENTER |
Press
on the TV.
The auto convergence function works for about 30 seconds.
/
Adjusting the convergence manually
When the auto convergence function does not work
correctly with
, adjust convergence by selecting CONVERGENCE of the FEATURES menu.
1 Press MENU.
2 Press V or v to move the cursor (z) to the
FEATURES menu ( 
), and press ENTER.
|
| F E AT URES | |
|
| GAME MODE | |
ENTER | ENTER | HYPER SURROUND : | |
OF F | |||
|
| ||
|
| AV OUT : | |
|
| MON I TOR | |
|
| CONVERGENCE |
3 Press V or v to move the cursor (z) to
CONVERGENCE and press ENTER.
The CONVERGENCE adjustment screen appears.
| R | |
| G | |
| B | |
R=Red | R | |
G=Green | ||
G | ||
B=Blue | B |
4 Press V or v to move the cursor (z) to the symbol showing the line you want to adjust, and press ENTER.
: Red vertical line (left/right adjustment)
: Red horizontal line (up/down adjustment)
: Blue vertical line (left/right adjustment)
: Blue horizontal line (up/down adjustment)
5 Press V or v to move the line until it converges with the center green line, and press ENTER.
R
G+B (Light blue)
R
G+B (Light blue)
To move up/right, press V.
To move down/left, press v.
6 Repeat steps 4 and 5 to adjust the other lines until all three lines converge and are seen as a white cross.
7 Press MENU to return to the normal screen.