Additional Information
Troubleshooting
If you have any problems, read this manual again and check the countermeasure for each of the symptoms listed below.
If the problem persists, contact your nearest Sony dealer or authorized service center.
Snowy picture
Noisy sound
/Check the antenna.
/Check the antenna connection on the TV and on the wall.
/Check the TV system (TV SYS) setting.
/Check the ATT (attenuator) setting.
Dotted lines or stripes
/This may be caused by local interference (e.g. cars, neon signs, hair dryers, etc.). Adjust the antenna for minimum interference.
Double images or “ghosts”
/This may be caused by reflections from nearby mountains or buildings. A highly directional antenna may improve the picture.
Good picture
Noisy sound
/Check the TV system (TV SYS) setting.
No picture
No sound
/Press u.
/Press Uto turn off the TV for about five seconds and then turn it on again.
/Check the power cord connection.
/Check the antenna connection.
/Check the VCR connections.
Good picture
No sound
/Press Á+.
/If “CENTER IN” is displayed on the screen, select “SPEAKER: MAIN” of the AUDIO ADJUST menu.
/Press ¤.
/Press A/B
.
No color
/Adjust the COLOR level in the VIDEO ADJUST menu of the PERSONAL option.
/Check the color system (COL SYS) setting.
TV cannot receive stereo broadcast signal
/Press A/B
until “AUTO” appears on the screen.
TV cabinet creaks
/Even if the picture or the sound is normal, changes in the room temperature sometimes make the TV cabinet expand or contract, making a noise. This does not indicate a malfunction.
Additional Information