Operating Instructions

ButtonDescription

qs FUNCTION buttons Press to select the equipment (VCR/DVD, SAT/ CABLE, TV) that you want to operate with the remote control. The indicator (LED) lights up momentarily when pressed to show which device the remote control is operating.

qd VCR (operating) Press to operate your VCR. The VCR must be programmed into the remote control. For instructions, see “Programming the Remote Control” on page 5.

and (to record)

Press the button and the button at the same time to record programs with your VCR. The remote control must be programmed before you can use REC.

 

m

Rewind.

 

M

Fast-forward.

 

 

Play.

 

x

Stop.

 

X

Pause. Press again to resume normal playback.

qf

TV/VIDEO

Press to cycle through available video inputs.

qg

DISPLAY

Press once to display the current time (if set) and

 

 

the program status such as channel number,

 

 

Channel Label (if set), video input, and Video Label

 

 

(if set). Press again to turn off the display.

qh

MTS/SAP

Press to cycle through the Multi-channel TV Sound

 

 

(MTS) options: Stereo, Auto SAP (Second Audio

 

 

Programming), and Mono.

qj

0 9 and

Press to change channels. The channel changes after

 

ENTER

two seconds.

qk

GUIDE

Press to display the program guide of your satellite

 

 

antenna.

ql

 

Press the arrow buttons to move the cursor in the

 

 

on-screen menus. Press the center button to select

 

 

an option.

w;

MENU

Press to display the on-screen menu. Press again to

 

 

exit the menu at any time.

wa

CH (channel)

Press to change channels. To scan rapidly through the

 

 

channels, press and hold down the CH+ or CH- button.

✍If you lose your remote control, see page 38.

4