Overview of Remote Control Buttons

 

1

 

2

 

3

qj

4

qh

5

qg

6

qf

7

 

8

qd

9

qs

q;

qa

 

1To temporarily switch off TV:

Press this button to temporarily switch off TV (the standby indicator

on TV lights up). Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use.

After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode.

2Selecting input source:

Press this button repeatedly until the desired input symbol of the source appears on the TV screen.

3Selecting channels:

Press these buttons to select channels.

For double-digit programme numbers, enter the second digit within 2.5 seconds.

4Previous channel button:

Press this button to watch the last channel selected (provided you watched it for at least 5 seconds).

5This button only works in Teletext mode.

6This button only works in Teletext mode.

 

GB

7 Selecting Teletext:

 

Press this button to switch on teletext.

 

8Control pad:

•When MENU is switched on, use these buttons to operate the menu system. For details refer to “Using the Menu System” on page 9.

•When MENU is switched off, press OK to show a channel overview. Then press v or V to select the channel and then press the OK button again to watch the selected channel.

9Selecting screen format:

Press this button repeatedly to change the screen format. For more details refer to ‘Auto Format’ on page 15.

q; Selecting channels:

Press this button to select the next or previous broadcast channel.

qa Muting the Sound:

Press this button to mute TV sound. Press again to restore the sound.

qs Adjusting TV volume:

Press this button to adjust the volume of the TV.

qd Displaying the menu system:

Press this button to display the menu on the TV screen. Press again to remove the menu display from the TV screen.

qf Selecting TV mode:

Press this button to switch off teletext or video input.

qgSelecting Sound effect:

Press this button repeatedly to change the sound effect.

qhSelecting Picture mode:

Press this button repeatedly to change the picture mode.

qj Displaying on Screen information:

Press this button to display all on-screen indications. Press again to cancel.

Besides the TV functions, all coloured and green symbol buttons are also used for Teletext operation. For more details, please refer to “Teletext” section of this instruction manual.

Overview 5