Connecting Additional Equipment
Connecting a TV and VCR
Rear of TV
13
S VIDEO
4
Y
2 |
VCR |
VIDEO
L
(MONO)
P B
P R
L
AUDIO OUT (VAR/FIX)
L
(MONO)
1
From cable/antenna
LINE |
IN |
VIDEO AUDIO L AUDIO R |
LINE |
OUT |
R 
R 
R
Audio R (red)
Audio L (white)
Video (yellow)
Connections
Optional connection
1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.
2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
Optional connection
❏If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
❏For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables.
Using your TV with this connection
❏Program your Sony remote control to operate your VCR (see page 5).
❏To activate your remote, press 
(FUNCTION button) to operate your VCR. In order to do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31).
❏Press 
repeatedly to switch between VCR input (VIDEO input) and VHF/UHF (local channels).
11
