Programming the Remote Control
If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR combination unit) that you want to control with the TV’s remote control, use the following procedure to program the remote control.
1 Check the list of “Manufacturer’s Codes” on page 6 and find the
2 Press 
.
✍The 
and 
FUNCTION button will flash when you press 
.
3 Press 
or 
FUNCTION button to indicate the type of component you want to program with the remote control.
✍You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.
4 Use the 0 
9 buttons to enter the
5 Press 
.
6 To check if the code number works, aim the TV’s remote control at the component and press the green POWER button (VCR/DVD, SAT/CABLE) that corresponds with that component. If it responds, you are done. If not try using another code listed for that manufacturer.
✍If you have problems programming your remote control, see “Troubleshooting” on page 42.
Remote Control
5
