Operation

Overview of the remote control buttons

To mute sound

Press to mute TV sound. Press again to restore the sound.

To return to TV mode

Press to return to the normal operation from teletext mode or standby mode.

To select Teletext

Press to switch Teletext on and off.

To select Electronic Programme Guide (EPG)

Press to switch EPG on and off.

To freeze the picture

Press if you wish to make a note of some information on the TV screen eg a telephone number. Press again to return to normal TV mode.

To select channels

Press the numbered buttons to select channels.

For double digit programme numbers, e.g.23, press -/-- first, then the buttons 2 and 3.

To display picture menu

Press to change the picture settings. Press the OK button to remove the display.

To display sound menu

Press to change the sound settings. Press the OK button to remove the display.

To display the Channel Table

Press the OK button. Press v or V to select the desired channel then press B to confirm.

To adjust TV volume

Press to adjust the volume of the TV

To operate other Sony equipment.

Open the remote control lid and set the selector VTR 1234 DVD according to the equipment you want to control: VTR 1: Beta VCR

VTR 2: 8mm VCR

VTR 3: VHS VCR

VTR 4: Digital Video (e.g.DCR-VX 1000/9000E, VHR-1000)

DVD: Digital Video Disk player

Use the buttons on the remote control to operate the equipment.

To reset to factory set levels.

Open the remote control lid and press to return picture and sound settings to factory-set levels. After the ‘Installation’ menu has appeared on the TV screen, refer to the ‘Selecting Language and Country’ section of the instruction manual to change your choice of language and country if desired.

To temporarily switch off TV

Press to temporarily switch off TV. Press again to switch on from standby mode. To save energy, we recommend switching off completely when TV is not in use.

NOTE: After 15-30 minutes without a TV signal and without any button being pressed, the TV switches automatically into standby mode.

To reveal on screen information

Press to reveal all on-screen indications. Press again to cancel. In Teletext mode, press to reveal the index page (normally page 100).

To select input signal or freeze teletext

Press to select inputs from the TV sockets (see Using Optional Equipment section). In Teletext mode, press to freeze the displayed page. Press once again to cancel.

Please refer to the ‘Operating PAP’ section of this instruction manual for details.

To return to previous channel

Press to return to the previous channel you were watching. Note: This can be done only after watching the present channel for 5 seconds.

Press to switch Multi PIP mode on and off.

To change screen format

Press repeatedly to select 4:3 mode or 16:9 mode (imitation of wide screen format).

Fastext keys

See Teletext section of manual for details.

To select menu items

Use the OK button and arrow keys to select the options available in the menu system of this TV.

To select channels

Press to select channels.

To display the menu

Press if you wish to use the TV menu system. Press again to remove the menu from the TV screen.

To display the time.

Open the remote control lid and press to display the time on screen. Press again to cancel.

To operate video equipment

Open the remote control lid and press these buttons to operate your video equipment (please refer to your VCR manual).

7