Operation

Using Multi PIP

Multi PIP (picture in picture) mode displays a succession of 12 still pictures and a 13th that is live. You can manually select which channel you wish to watch, either full-screen or in the PIP mode.

1.Press the button on the remote control to select Multi PIP mode. 13 programme positions appear on the screen with the current channel in the centre.

2.Press the PROGR+/- buttons repeatedly to select the next or preceding 12 programme positions.

3.Press the v, V, b or B buttons to move within the 13 displayed channels.

4.Press the OK button to select the framed channel. This channel now moves to the centre.

5.Press the OK button again to display the selected channel or press to remove Multi PIP mode from the TV screen.

02

03

04

05

13

01

 

06

12

 

 

07

11

10

09

08

Operating PAP (Picture and Picture)

This PAP feature divides the screen into two for watching two channels simultaneously (with a video source on one if you want). The sound of the left screen comes through the TV loudspeakers, the sound of the right screen is selectable via headphones.

Switching PAP on and off

Press once to display the screens and twice to switch PAP off.

Selecting sound for the headphones

With PAP switched on, refer to the ‘Adjusting the picture and sound’ section of this manual and set ‘i Dual Sound’ to ‘PAP’.

Selecting a PAP source

Press M. The symbol M appears in the right screen. Select the desired source using the numbered

buttons (for a TV channel) or (for a video source).

Swapping screens

Press to swap the two screens.

Zooming the screens

Press the b or B buttons to change the size of the two screens.

12