Operation

NexTView

Using the ‘Long Info’ menu

With this ‘Long Info’ menu screen, you can set timers or record selected programmes.

1.Press v or V to select a future programme in the programme list column.

2.Press the OK button to display the ‘Long Info’ menu on the TV screen.

To set the timer

Press the b or B buttons to highlight the icon then press the OK button repeatedly to ‘set the timer’ or ‘cancel the timer’. If you choose to set the timer, the programme is marked with a clock symbol and a message appears on the screen shortly before the programme is due to start asking whether you wish to still view this programme.

To view the timer table

Press the b or B buttons to highlight the icon then press the OK button repeatedly to switch on/off the timer table. This table shows the programmes on which you have already set a timer. (You can set a timer on up to 5 programmes).

07Tue 12:38

First nextTView/EPG-Providers in Europe

SWISS

TXT

 

TPS / RINGIER

nexTView

 

 

 

Tue 07. 04 .98

 

Address Mapping

The position of the addresses in the OSDA is shown in the following diagram. The position values of the DPW are set to '0'.

If other values are set, the complete combination will be scrolled.

Example:

if the DPWC is set to '63', the char-

This channel has been set for a timer

 

 

 

 

 

 

 

VPS/PDC

On

 

 

 

 

Speed

SP

 

 

 

 

 

 

 

 

 

Timer Prog

VCR1

 

 

 

 

 

 

 

 

 

To record programmes*

* (only with Smartlink VCRs)

1.Connect your Smartlink VCR to the AV2 socket on your TV.

2.Press b or B to select then press the OK button to download the information to your VCR.

3.To set up the VCR:

VPS/PDC

Press b to select VPS/PDC then press the OK button repeatedly to select ‘On’ or ‘Off’. With this setting on you have the guaranteed recording of the whole broadcast should there be a change in the TV programme. This only works if the selected channel broadcasts a VPS/PDC signal.

Speed

Press V to select ‘Speed’ then press the OK button repeatedly to select between ‘SP’ for standard play or ‘LP’ for longplay. With longplay you can record twice as much on a videotape. The picture quality however may suffer.

VCR Setup

Press V to select ‘VCR Setup’ then press the OK button repeatedly to select which VCR you wish to programme, namely ‘VCR1’ or ‘VCR2’.

4.Finally, press B to select the icon then press the OK button to remove the menu from the TV screen.

9