Sony KV-BZ212 xChanging the “Picture” setting, Adjusting the “Picture Adjustment” items under “Custom” mode

xChanging the “Picture” setting

The “Picture” menu allows you to adjust settings below.

1 Press WEGA GATE and select “Settings”.

2 Make sure the “Picture” icon () is selected, then press .

3 Press V or v to select the desired item (e.g., “Picture Mode”), then press					.
	Select	To
	“Picture Mode”	choose either “Vivid” (bright, contrast and sharp),
		“Standard” (normal) or “Custom”*.
	“Color Temperature”	adjust white color tint.
		Choose either “Cool” (blue tint), “Neutral” (neutral tint) or
		“Warm” (red tint).
	“Intelligent Picture”	optimize picture quality.
		Press V or v to select “On”, then press .
		To cancel, select “Off”, then press .
	“Signal Level Indicator”	display the signal level when the “Intelligent Picture” is
		functioning.
		“Intelligent Picture Signal Level” indicator will be displayed,
		followed by picture improvement when you change the
		program number or the input mode.
		red	amber	green
		(weak)	(average)	(good)

Press V or v to select “On”, then press		.
To cancel, select “Off”, then press	. “Intelligent Picture” is

still functioning.

*You can adjust the setting to your personal preference in the “Picture Adjustment” and “Color Temperature” options only when the “Custom” mode is selected.

Adjusting the “Picture Adjustment” items under “Custom” mode

1	Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,
	“Hue” (color tones) or “Sharpness”, then press .

Selecting “Reset” will set your TV to the factory settings.

2	Press V,v,B or b to adjust the setting of your selected item, then press .
3	Repeat the above steps to adjust other items.

The adjusted settings will be received when you select “Custom”.

Notes

•“Hue” can be adjusted for the NTSC color system only.

•Reducing “Sharpness” can also reduce picture noise.

14