Sony KV-BZ21, KV-SW21 xSecuring the TV, xGetting Started, or (1), Step, Step, Step, Step, Tip, band, Note, Note, 20 mm, screws, 3.8 mm, clamps, (2), clamps, your TV

xSecuring the TV

To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. Use only the supplied screws. Use of other screws may damage the TV.

	20 mm
screws	3.8 mm
	clamps	band

	or (1)
Screw the band to the TV stand and		Put a cord or chain through the
to the provided hole at the rear of		clamps.
your TV.	(2)	Screw one clamp to a wall or pillar
		and the other clamp to the provided
		hole at the rear of your TV.

xGetting Started

Step 1

Insert the batteries (supplied) into the remote.

b

Note

•Do not use old or different types of batteries together.

Step 2

Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.

Tip

•You can also connect your TV to other optional components (see page 8).

b

Step 3

Plug in the power cord, then press ! on the TV to turn it on.

Note

•The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not indicate a malfunction.

Step 4

Set up the TV by following the instructions of the “Initial Setup” menu (see page 5).

Select Confirm End

4