Sony KV-BZ21, KV-SW21 Setting up your TV (“Initial Setup”) (continued), channels, Then press, Then press, then press, (block symbol), using PROG +/–, (KV-SW21M81only)

Setting up your TV (“Initial Setup”) (continued)d)If you wish to edit the channels, press to change to edit mode.Press b until the mode that you wish to edit

is highlighted: Label, Skip,		(block symbol).
Then press .
1)	To label, press V or v to select the
	alphanumeric characters for the label.		Confirm	Exit
	Then press .	Select
2)	To skip the program number, press V or v to
	select “On”. Then press .
	You can skip this program number when
	using PROG +/–.	Select	Confirm	Exit
3)	To block unwanted program number,
	press V or v to select . Then press .
e) Repeat step b) to d) if you wish to change other
channels.		Select	Confirm	Exit

Press WEGA GATE to go to the next menu.

4	Press B or b to adjust the bars on the top
	and bottom of the menu if they are

slanted, then press (KV-SW21M81only).

Select Confirm End

If no adjustment is necessary, then press .

5	To prevent this “Initial Setup” menu from
	appearing again when you turn on the TV
	by pressing !, press V or v to select “No”,
	then press .
	To allow this menu to appear again, select	Select	Confirm

“Yes”, then press .

Tip

•You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.

6