Sony KV-BZ21, KV-SW21 xSetting up your TV (“Initial Setup”)

xSetting up your TV (“Initial Setup”)

When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV top control panel.

1	Press V or v to select the desired menu
	language, then press .

The selected menu language appears.

Select Confirm End

2	Press V or v to select “Yes”, then press
	to preset the channels automatically.

The screen will indicate automatic presetting is in progress.

After all available channels have been tuned and stored, the “Program Sorting/Edit” menu appears automatically on the screen.

To skip automatic channel presetting, select “No”, then press .

Select Confirm End

Program:	01
TV System:	Auto
VHF Low
	End

If the message “No channel found. Please connect cable/antenna” appears, check your TV connections, then press .

3	The “Program Sorting/Edit” menu enables
	you to sort and edit the channels.
	a) If you wish to keep the channels in the		Program Sorting/Edit
		current condition, press WEGA GATE	PROG Label		Skip
			01		Off
		to exit.	02		Off
			03		Off
	b)	Press V or v to select the program	04		Off
			Sorting:	Edit:
		number with the channel you wish to	Select		Confirm	Exit
		change. The selected channel will
		appear on the screen.	Program Sorting/Edit
	c)	If you wish to store the channels in a	PROG Label		Skip
			01		Off
		different order:	02		Off
			03	01		Off
		1) Press b to enter sorting mode.	04		Off
			Sorting mode
		2) Press V or v to select the new	Select		Confirm	Exit
		program number position for your
		selected channel, then press B.
					continue

5