CD-LIGHT SYNC OUT jack

Connect the D-LIGHT SYNC controller. You need to connect the D-LIGHT SYNC controller to a lighting device* (not supplied). The lighting device will react according to the control signals transmitted by the D-LIGHT SYNC controller upon receiving music source from the system. For details on the use of the D-LIGHT SYNC controller and lighting device, refer to the operating instructions supplied with the respective device.

D-LIGHT SYNC controller cord

EFRONT SPEAKER terminals

Connect the front speaker left/right to the terminals on the subwoofer.

Insert only the stripped portion of the speaker cords into the FRONT SPEAKER terminals.

R

L

FRONT

 

SPEAKER

*Refer to the operating instructions supplied with the D-LIGHT SYNC controller for the recommended lighting device.

Note

The lighting effect may be different depending on the connected lighting device or the type of music being played back.

DSYSTEM CONTROL jack

Connect the system connector of subwoofer to the SYSTEM CONTROL jack on the unit.

Insert the plug of the SYSTEM CONTROL cord into the jack, then secure the screws of the plug.

Unit (Left panel)

Subwoofer (Rear panel)

Plug

 

 

 

SYSTEM CONTROL cord

 

 

 

Screws

Note

Be sure to use only the supplied speakers.

FVOLTAGE SELECTOR

For models equipped with a voltage selector on the subwoofer, set VOLTAGE SELECTOR to the position of your local power line voltage.

Depending on the model, the VOLTAGE SELECTOR may differ.

VOLTAGE SELECTOR

120V 220V 230-

240V

GPower

Connect the power cord on the subwoofer to a wall outlet after you have make all connections. The demonstration appears in the display. When you press "/1, the system turns on and the demonstration automatically ends.

If the supplied adaptor on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adaptor).

14GB