Specifications

AUDIO POWER SPECIFICATION

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

USA model only

With 6-ohm loads, both channels driven, from 120 Hz – 10 kHz; rates 90 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 miliwatts to rated output.

Amplifier section

North American model only

The following are measured at

AC 120 V, 60 Hz

Front speaker

RMS output power (reference):

150 W + 150 W (per channel at 6 Ω, 1 kHz, 10% THD)

Subwoofer

RMS output power (reference):

150 W (at 6 Ω, 100 Hz, 10% THD)

Other models

The following are measured at Mexican model:

AC 127 V, 60 Hz Other models:

AC 120, 220, 230 – 240 V, 50/60 Hz

Front speaker

Power Output (rated):

90 W + 90 W (at 6 Ω, 1 kHz, 1% THD) RMS output power (reference):

150 W + 150 W (per channel at 6 Ω, 1 kHz, 10% THD)

Subwoofer

RMS output power (reference):

150 W (at 6 Ω, 100 Hz, 10% THD)

Inputs

LINE IN 1, 2 L/R:

Voltage 250 mV, impedance 47 kilohms

MIC:

Sensitivity 1 mV, impedance

10kilohms

(USB) port: Type A

Outputs

i: accepts headphones of 8 Ω or more

FRONT SPEAKER:

accepts impedance of 6 Ω

Disc player section

System

Compact disc and digital audio system Laser Diode Properties

Emission Duration: Continuous

Laser Output*: Less than 44.6 ∝W

*This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical

Pick-up Block with 7 mm aperture. Frequency response

20 Hz – 20 kHz Signal-to-noise ratio More than 90 dB

Dynamic range More than 88 dB

Continued l

Information Additional

49GB