Changing the display

1 Press OPTIONS.

2 Turn JOG DIAL to select “ILLUM”, then press ENTER.

3 Turn JOG DIAL to select the setting you want.

4 Press ENTER.

To exit the OPTIONS menu

Press OPTIONS again.

Changing the display mode

Press DISPLAY repeatedly while the system is turned off.

You can select the following display mode.

Demonstration1)

The display changes and the indicators flash even when the system is turned off.

No display (Power Saving Mode)1)2)

The display is turned off to conserve power. The timer and clock continue to operate.

Clock

The clock is displayed. The clock display automatically turns to Power Saving Mode after a few seconds. However, the display returns to clock display when you connect an iPod.3)

1)When an iPod is connected, the display change to clock. If you remove the iPod, the display changes to Power Saving Mode after a few seconds.

2)You cannot perform the following operations during Power Saving Mode:

Setting the clock (page 17).

Changing the AM tuning interval (page 20).

Turning on the system by pressing the function buttons.

3)The clock is displayed continuously while the iPod is being charged. To turn off the clock display, press DISPLAY (see “To stop charging the iPod” (page 28)).

32GB