Setting the clock

Use buttons on the remote for the operation.

1 Press "/1 to turn on the system.2 Press TIMER MENU.

The hour indication flashes in the display.

If “PLAY SET?” flashes in the display, press V or v repeatedly to select “CLOCK SET?”, then press .

3 Press V or v repeatedly to set the hour.4 Press .

The minute indication flashes in the display.

5 Press V or v repeatedly to set the minute.6 Press .

The clock starts functioning.

Note

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

To display the clock when the system is off

Press DISPLAY repeatedly until the clock is displayed. The clock is displayed for a few seconds (except when iPod is connected).

When an iPod is connected, the display will change to clock automatically. For details, see page 32.

Started Getting

17GB