Connecting the Personal LCD Display (continued)

If your video equipment has an S-video jack

Connect the Personal LCD Display to the video equipment using a commercially available

S-video cable and an audio/video cable to enjoy the highest quality pictures. In this case, you do not need to connect the video (yellow) plug. If you connect both the S-video and video plugs, the S-video signal is automatically selected. When you connect the Personal LCD Display to the video equipment, set the PC- VIDEO switch on the power supply box to “VIDEO.”

Set the PC-VIDEO switch to “VIDEO.”

Power supply box

S-video cable

to S VIDEO connector

VCR, Laser disc player, DVD player, camcorder, etc.

S VIDEO

AUDIO / VIDEO

to AUDIO/VIDEO connector

: Signal flow

to S-video output

to audio/video output

Audio/video cable

(special miniplug special miniplug)

 

Video (yellow)

 

Audio L (white)

Audio/video cable

 

(special miniplug

phono

plug)

Audio R (red)

to audio/video outputs

 

About the AUDIO/VIDEO input jack

The AUDIO/VIDEO input jack of the Personal LCD Display is a special minijack, and the signal connections are aligned as shown on the right. This alignment may differ depending on the equipment.

Audio L

Audio R

GND

Video

14-US

Page 14
Image 14
Sony LDI-100B operating instructions If your video equipment has an S-video jack, Audio L Audio R, Video