Sony LMD-2030W Adjustment Using the Menus, Items, About the memory of the settings, To reset items that have been adjusted, STATUS (the items indicate the current settings.)

3 Select an item.

Press the M or m button to select the item, then press the , or ENTER button.

The item to be changed is displayed in yellow.

Note

If the menu consists of multiple pages, press M or m to go to the desired menu page.

4 Make the setting or adjustment on an item.

When changing the adjustment level:

To increase the number, press the M button. To decrease the number, press the m button.

Press the ENTER button to confirm the number, then restore the original screen.

When changing the setting:

Press the M or m button to change the setting. Press the ENTER button to confirm the setting.

Notes

•An item displayed in blue cannot be accessed. You can access the item if it is displayed in white.

•If the key inhibit has been turned on, all items are displayed in blue. To change any of the items, turn the key inhibit to OFF first.

For details on the key inhibit, see “KEY INHIBIT menu” (page 19).

To clear the menu

Press the MENU button.

The menu disappears automatically if a button is not pressed for one minute.

About the memory of the settings

The settings are automatically stored in the monitor memory.

To reset items that have been adjusted

Pressing the RESET button while you are adjusting any of the menu items resets the menu item to the previous setting.

Adjustment Using the Menus

Items

The screen menu of this monitor consists of the following items.

STATUS (the items indicate the current settings.)

FORMAT

COLOR TEMP

GAMMA

COMP LEVEL

NTSC SETUP

RGB/COMP SEL

SCAN MODE

DISPLAY

OPTION

COLOR TEMP/BAL

COLOR TEMP

MANUAL ADJ

USER CONTROL

CONTROL

USER CONFIG

RGB/COMP SEL

COMP LEVEL

NTSC SETUP

GAMMA

FORMAT DISP

LANGUAGE

MARKER

CENTER MARKER

MARKER LEVEL

SCAN

PIC DELAY MIN

REMOTE PARALLEL

1PIN

2PIN

3PIN

4PIN

6PIN

7PIN

8PIN

KEY INHIBIT

KEY INHIBIT

16 Adjustment Using the Menus