
Location and Function of Parts and Controls
Front Panel
1
|
|
|
| MENU | VOLUME | POWER |
RGB/ | EXT | BLUE |
|
|
|
|
LINE A HDMI COMPONENT SDI | SYNC | ONLY | SCAN ASPECT |
|
| KEY |
|
|
|
|
|
| INHIBIT |
|
|
| RESET | ENTER |
|
|
qd qs qa 0 9 8 7 6 5 | 4 3 2 |
qf
aTally lamp
You can check the status of the monitor by the color of the tally lamp.
The tally lamp lights in red, green or amber depending on the setting of the REMOTE PARALLEL menu.
bPOWER switch and indicator
Press to turn on the power. The indicator turns on. Press again to turn off the power.
cKEY INHIBIT indicator
Lights when the key inhibit function works.
For details on the key inhibit, see “KEY INHIBIT menu” (page 19).
dVOLUME buttons
Press the + button to increase the volume or the – button to decrease it.
eMenu operation buttons
Displays or sets the
M/m/</, (arrow) buttons
Select the menu or make various adjustments.
MENU button
Press to display the
Press again to clear the menu.
RESET button
Resets the value of an item back to the previous value. This button functions when the menu item is adjusted (displayed) on the screen.
ENTER button
Press to confirm a selected item on the menu.
fASPECT select button
Sets the aspect ratio of the picture, 4:3 or 16:9.
gSCAN select button
You can change the scan size of the picture.
Press to change the scan size among over (5 % over scan), under
hBLUE ONLY button
Press to eliminate the red and green signals. Only blue signal is displayed as a monochrome picture on the screen. This mode is convenient for chroma and phase adjustments and monitoring of VCR noise.
iEXT SYNC (external sync) button
Press to operate the unit on an external sync signal through the EXT SYNC IN connector.
The EXT SYNC button works when the component/RGB signals are input.
jSDI button
Press to monitor the signal through the OPTION IN connector.
kRGB/COMPONENT button
Press to monitor the signal through the RGB/COMPONENT input connector.
lHDMI button
Press to monitor the signal through the HDMI IN connector.
8 | Location and Function of Parts and Controls |
|
|