Component input
AUDIO input
AUDIO input
4-pinmini-DIN (1)
BNC type (1), 1 Vp-p ±3 dB, negative synchronization
Phono jack (1), –5 dBu 47 kilohms or higher
RGB/COMPONENT input connectors BNC type (3)
RGB input 0.7 Vp-p ±3 dB, (Sync On Green, 0.3 Vp-p negative sync.)
LINE A input connectors
Y/C input VIDEO input
Input/output connectors
Input

Specifications

Picture performance

LCD panel

a-Si TFT Active Matrix

Picture size

20.1 type

 

433 × 271 × 511 mm

 

(W/H/Diagonal)

 

(17 1/8 × 10 3/4 × 20 1/8 inches)

Resolution

1,680 × 1,050 dots (WSXGA+)

Viewing angle

89° / 89° / 89° / 89° (typical)

Scan

Under –3 %

 

Over 5 %

Aspect

16 : 10

Display color

16,700,000

0.7 Vp-p ±3 dB, (75 % chrominance standard color bar signal)

Phono jack (1), –5 dBu 47 kilohms or higher

OPTION IN connector

D-sub 9-pin (1), female

OPTION AUDIO IN connector

Phono jack (1), –5 dBu 47 kilohms or higher

External synchronized input connector

BNC type (1), 0.3 to 4 Vp-p negative polarity binary

HDMI IN connector

HDMI (1)

PARALLEL REMOTE input connector

Parallel remote Modular connector 8-pin (1)

Output

LINE A output connectors

Y/C output

4-pin mini-DIN (1), Loop-through,

 

with 75 ohms automatic terminal

 

function

VIDEO output

BNC type (1), Loop-through, with

 

75 ohms automatic terminal

 

function

AUDIO output

Phono jack (1), Loop-through

RGB/COMPONENT output connectors RGB/Component output

BNC type (3), Loop-through, with

75 ohms automatic terminal function

AUDIO output Phono jack (1), Loop-through External synchronized output connector

BNC type (1), Loop-through, with

75 ohms automatic terminal function

Built-in speaker output

0.5 W (mono)

General

Power

AC100 – 240 V, 50/60 Hz

Power consumption

Maximum: approx. 72 W, 0.8 A – 0.4 A

Peak inrush current

(1) Power ON, current probe method: 34A

 

(100V), 64 A (240V)

 

(2) Hot switching inrush current,

 

measured in accordance with European

 

standard EN55103-1: 55 A (230V)

Dimensions

Approx. 493 × 408 × 264 mm

 

(not including the projection parts)

 

(19 1/2 × 16 1/8 × 10 1/2 inches)

 

(w/h/d)

Mass

Approx. 9.6 kg (21 lb 3 oz)

Operating conditions

 

Temperature

0 °C to 35 °C (32 °F to 95 °F)

Recommended temperature

 

20 °C to 30 °C (68 °F to 86 °F)

Humidity

30% to 85% (no condensation)

Pressure

700 to 1060 hPa

Storage and transport conditions

Temperature

–20 °C to +60 °C (–4 °F to +140 °F)

Humidity

0% to 90%

Pressure

700 hPa to 1060 hPa

Accessories supplied

AC power cord (1)

 

AC plug holder (1)

 

Operating Instructions (1)

 

CD-ROM (1)

 

Using the CD-ROM Manual (1)

 

Warranty Card (1)

Optional accessories

 

 

Mounting bracket MB-529

 

SDI input adaptor BKM-320D

Design and specifications are subject to change without notice.

Note

Always verify that the unit is operating properly before use.

SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.

20 Specifications