Create the network settings to use the public wireless LAN service.
Refer to the instructions for the PSP® system to do the necessary settings. The settings such as SSID and security will depend on the public wireless LAN provider you use. For details, refer to the website or other documents of the provider you intend to use.
To use the LocationFree® Player via a public wireless LAN service, take the following steps:
1Select [New Connection] under 
from the home menu to create the network settings. Follow the
2Set [Address Settings] to [Custom].
Press the right button until [Internet Browser] appears.
3Set [Internet Browser] to [Start].
1 Check that an access point from apublic wireless LAN service is available nearby.Depending on the service provider, access point availability or connection method may vary.
2 Turn on the WLAN switch of the PSP® system.
3 Select 
under 
from the home menu, and then press the 
button.
A list of network settings is displayed.
4 Select a connection from the list of network connections, and then press the 
button.
Select the connection for the public wireless LAN service to be used.
Connection to the Base Station over the Internet begins.
5 The TV or video picture is displayed. When a connection is established, the video picture is displayed.
Note
No connection will be established if the Base Station, router, modem or video devices are not turned on.
Closing the LocationFree® Player1 Press the
button during TV or video playback.A confirmation screen is displayed.
2 Select [Yes], and then press the
button.The LocationFree® player closes.
Player LocationFree® the on Video or TV Watching
14