Using the Remote Control
1 Select 
from the control panel, and then press the 
button.
The
Remote control
Clearing the remote control
Press the 
button or the 
button.
Using the remote control to control the video device(s) connected to the Base Station
You can operate a video deck or DVD player that is connected to the Base Station using the on- screen remote control.
For example, if you have a
To display the remote control for a connected device on the PSP® system, you must first save the data for the remote control on a Memory Stick Duo™ and then complete [Remote Control Settings] (1 page 20).
For more information on remote control data, see www.sony.com/locationfree/ownerslounge/psp.
Depending on the connected device, the usage method of the remote control for the device may vary. The main functions that are commonly available on remote controls are explained below.
1Switch the function to be controlled by the remote control for multifunction devices such as hard disk/DVD
combined video recorders.
2Turn the connected device on/off.
3 Switch among control panels for connected devices with remote controls
that have multiple control panels.
4 Operate the connected device.
zTip
To make faster response to the remote control, video and audio may appear to speed up when operating the remote control. It is not a malfunction.
Notes
•Save remote control data in the following location on your Memory Stick Duo™:
•Use the same method of operation as you would with the remote control supplied with the connected device. However, buttons for features that are not available in the connected device cannot be used even if they are shown on the
•Button names as shown on the
•When using a multifunctional connected device such as a combined Hard Disk or DVD player/video deck,
Player LocationFree® the on Video or TV Watching
16