Sony MDR DS5100 Connecting the Headphone System, Setup

Connecting the Headphone System

Setup

You can place the digital surround processor in an upright position or on its side.

To use in an upright position:

Use a coin to attach the supplied stand to the bottom of the digital surround processor.

To use on its side:

Place the digital surround processor so that the four rubber supports are on the bottom.

/

Rubber supports

Notes

•Install the digital surround processor in a location where there are no obstructions between the processor and headphones when used.

•Do not install the digital surround processor in unstable locations, such as on top of the TV. If the processor falls down, it could cause an injury or be damaged.

•If the digital surround processor is placed in an upright position, always attach the stand for added safety.

•If the digital surround processor is placed on its side, the full infrared transmission range may not be obtained depending on installation conditions.

•If the digital surround processor is placed on its side, do not place the digital surround processor on the side not having the rubber supports.

(Continued)

Operation 13GB