The approximate infrared transmission area from the digital surround processor is shown in the illustration below.
Infrared beams
Approx. 4 m
Digital surround | 45° | Approx. | |
processor | |||
| 10 m | ||
|
|
45°
Approx. 4 m
Notes
•Because this system uses infrared beams, even if the headphones are within the transmission area shown above, electrical noise (hissing noises) may increase as the headphones get farther away from the digital surround processor. Also, if the infrared beams are blocked, the sound may be interrupted or noise may be heard. This is due to the infrared beam characteristics and is not a malfunction.
•Do not cover the infrared beam sensor with your hand or hair.
•As long as the headphones are in the transmission area shown in the illustration above, the headphones can have any orientation with respect to the digital surround processor (facing, turned 90°, or turned 180°).
•The sound may differ depending on the digital surround processor position and conditions in the room. It is recommended that you place the digital surround processor in the location which produces the clearest sound.
•Mixed signals may result if the digital surround processor is used with other processors or transmitters.
(Continued)
Operation 25GB