¡Additional Information

Troubleshooting

If you run into any problem using this headphone system, use the following checklist. Should any problem persist, consult your nearest Sony dealer.

Symptom

Cause and remedy

No sound

/Turn on the digital surround processor.

(both channels

/Check that the AV component and AC power adapter are connected to the

or one channel)

 

digital surround processor and that they are plugged into the power outlet.

 

/Turn on the AV component connected to the digital surround processor, and

 

start the program (playback).

 

/Use the INPUT button to check whether the AV component you want to listen

 

to is properly selected.

 

/If the AV component headphone jack is connected to the digital surround

 

processor, raise the volume level on the connected AV component.

 

/Raise the headphone volume.

 

/Check the position of the BALANCE control on the headphones.

 

/The Mute Function is on.

 

• Check that there is nothing blocking the path from the digital surround

 

processor to the headphones.

 

• Try to use the headphones as close as possible to the digital surround

 

processor.

 

• Change the position or angle of the digital surround processor.

 

/The POWER indicator on the headphones is faint or out. This indicates that

 

the battery power is low. If you are using rechargeable batteries, recharge the

 

batteries. If you are using dry-cell batteries, replace with new ones. If the

 

indicator is still out, consult your nearest Sony dealer.

 

/You are trying to play a DTS audio track on a DVD player that does not

 

support DTS.

 

Either use a DVD player that supports DTS, or select a Dolby Digital or PCM

 

audio track.

 

 

Distorted sound

/Set the ATT (attenuator) switch on the digital surround processor to “–8dB”.

 

/The POWER indicator on the headphones is faint or out. This indicates that

 

the battery power is low. If you are using rechargeable batteries, recharge the

 

batteries. If you are using dry-cell batteries, replace with new ones. If the

 

indicator is still out, consult your nearest Sony dealer.

 

/If the AV component headphone jack is connected to the digital surround

 

processor, lower the volume level on the connected AV component.

 

/When using DTS audio sources, set the processor output mode to VIRTUAL

 

SURROUND (page 23).

 

 

28GB

 

Additional Information