Connecting the digital surround processor with digital components

Use the supplied optical digital connecting cable to connect the optical digital output jack on a DVD player (or LD player), digital satellite tuner, or other digital component to the DIGITAL IN jack of the digital surround processor.

Digital surround

processor

DVD player, LD player, digital satellite tuner, or other digital component having an optical digital output jack

To DIGITAL IN jack

To optical digital output jack

Optical digital connecting cable (supplied)

Take off the cap on the jack, match the orientation of the plug with the jack, and then insert until the plug fits into place.

Notes

•The optical digital connecting cable is an extremely high-precision device and is sensitive to jolts and external pressure. Therefore, be careful when inserting and removing the cable plug.

•This system is not provided with the AC-3 RF jacks, and so AC-3 RF signals from LD players cannot be directly input.

•The digital input for the digital surround processor does not support sampling frequencies of 96 kHz. Set the digital output setting for the DVD player at 48 kHz when using this system. Noise may be heard when a 96 kHz digital signal is input.

DTS

•A DTS-compatible DVD player is required for the playback of DVDs recorded in DTS audio. (For more details, see the instruction manual of the DVD player.)

•When playing back sources recorded in DTS audio, press the INPUT button on the processor to select “DIGITAL”.

•When playing LDs and CDs recorded in DTS format, noise may occur at the start of playback or when fast forwarding. This is not a malfunction.

14GB Operation