Sony MDS-JE500 Synchro-RecordingWith a Sony CD Player, Recording on MDs, To pause recording

Recording on MDs

Synchro-Recording With a Sony CD Player

By connecting your deck to a Sony CD player or Hi-Fi Component System, you can easily dub CDs onto MDs using the CD synchro buttons on the remote. If your deck is connected to a Sony CD player by a digital input cable, track numbers are automatically marked as appear on the original regardless of whether “LevelSync ON” or “LevelSyncOFF” is selected. If your deck is connected to a Sony CD player by audio connecting cords through LINE (ANALOG) IN, track numbers are automatically marked when you select “LevelSync ON” (see “Marking Track Numbers While Recording” on page 12).

As the same remote controls both the CD player and the deck, you may have trouble operating both units if they are far from each other. If you do, place the CD player close to this deck.

6￿

￿

STANDBY		á	P p
START	=	+	r
	0	)
STOP
CD PLAYER P	P	= +

1Set the source selector on the amplifier to CD.

2Do Steps 2 to 5 in “Recording on an MD” on page 6 to prepare the deck for recording.

3Insert a CD into the CD player.

4Select the playback mode (Shuffle Play, Program Play, etc.) on the CD player.

5Press STANDBY.

The CD player pauses for playing and the deck pauses for recording.

6Press START.

The deck starts recording and the CD player starts playback.

The track number and elapsed recording time of the track appear in the display.

If the CD player does not start playing

SomeCDplayermodelsmaynotrespondwhenyou pressSTARTontheremoteofthedeck.Press Ponthe remoteoftheCDplayerinstead.

7Press STOP to stop synchro-recording.

To pause recording

PressSTANDBYorCDPLAYER P. Torestartrecording,pressSTARTorCDPLAYER P. Anewtracknumberismarkedeachtimeyoupause recording.

You can use the remote of the CD player during synchro-recording

Whenyoupress p,theCDplayerstopsandthedeck pausesforrecording.

Whenyoupress P,theCDplayerpausesandthedeck pausesforrecording.

Torestartsynchro-recording,press á.

You can change CDs during synchro-recording

DothefollowingstepsinsteadofStep7above.

1Press pontheremoteoftheCDplayer. Thedeckpausesforrecording.

2ChangetheCD.

3Press áontheremoteoftheCDplayer. Synchro-recordingrestarts.

You can also do synchro-recording with a Sony video CD player

Usingtheprocedureforsynchro-recordingwithaSony CDplayer,youcandosynchro-recordingwithaSony videoCDplayeralso.

ToselectthevideoCDplayer,pressbuttonnumber2 whilepressingdownthePOWERbuttonbeforestarting theprocedure. ToselecttheCDplayeragain,pressbuttonnumber1 whilepressingdownthePOWERbutton. ThedeckisfactorysettoaCDplayerforsynchro- recording.

You can check the remaining recordable time on the

MD

PressDISPLAY(seepage16).

14