Location and Function of Parts

Front Panel Parts Description

This chapter tells you about the location and function of the various buttons, controls on the MD deck.

1 2 3

6 5 4

1N/> button

Press while the unit is stopped to start playback. Press while the unit is playing to locate the beginning of the next track.

2MD insertion slotInsert the MD as illustrated below.With the labeled side up

With the arrow pointing towards the deck

3x/Zbutton

Press while the unit is playing to stop playback. Press while the unit is stopped to eject the MD.

4Recording indicatorLights up in the following cases:

While an audio file is being transferred from the connected computer to the MD deck (check-out). While an audio file is being transferred from the MD deck to the connected computer (check-in).

When TOC information (such as track information) has not been recorded to the MD. Flashes when overwriting of the MD’s TOC by the MD deck is started by pressing x/Z.

5Net MD lampIndicates the USB connection status between the unit and the computer.

Lights dimly when the unit is connected only to a wall outlet with the supplied AC adaptor.

Lights brightly when the unit is connected to a computer with its operating system running.

6Playback indicatorLights during playback.Flashes while the MD's TOC is being loaded by the MD deck.Notes

•Except for operation of the x/Zbutton for ejecting the MD, all other operations on the MD deck are disabled while the Net MD is connected through the supplied USB cable to a computer with its operating system running.

Under these conditions, the Net MD lamp flashes (the other indicators remain off) whenever you attempt to do an operation that is disabled.

•The flashing of the Net MD lamp and flashing or lighting up of the other indicators are indications that the MD deck’s self-diagnosis function is active. For details, see page 12.

4GB