3 Select a “V Drive” box for registration by adjusting the SEEK/AMS control either on the unit or the rotary commander.

VOICE

Tip

If you select an already registered box number, the registered source will be played or tuned in to.

Registering a vocal phrase

1 Once all the steps of “Selecting a “V Drive” box for registration” are completed, press (TALK) on the rotary commander .

2 After you hear the unit’s vocalized

EN instruction “Please speak now.”, pronounce a desired phrase toward the supplied microphone.

Please speak now.

3 After the vocalized instruction “Please repeat.”, pronounce the same phrase again.

Please repeat.

4 After another vocalized instruction “Please repeat.”, pronounce the same phrase one more time.

Please repeat.

The unit records the vocal phrase in this step in order to identify the registered phrase later. When the unit answers “OK!”, the registration is completed.

Notes

•Do not attempt to register while driving, as this may create a traffic hazard.

•Be sure to reply after the unit’s vocalized instruction.

•When a beep sound is heard, the registration failed. In this case, repeat the same process starting from step 1.

•Do not use phrases of similar pronunciation such as “Sony POPS 1” and “Sony POPS 2”, because the unit may not be able to distinguish the difference.

•After you hear the unit’s vocalized instruction, reply within three seconds.

Tips

•When you register the phrases, pronounce them clearly and loudly to make it easier for the unit to recognize them.

•Registration should be made while the car is parked with the engine running so that the unit will recognize your voice more easily when you are driving.

•Though the vocalized instructions are in English, any language can be used for registration.

•The volume of the vocalized instructions can be adjusted on the unit or by the rotary commander.

22