Sony MDX-C8900R Adjusting the frequency of the subwoofer(s), CD, or MD), 1 Press (SHIFT), 4 Press (SHIFT), 4 Press (SHIFT)

1 Press (SHIFT).

2 Press (3) (SET UP) repeatedly until the desired item appears.

Each time you press (3) (SET UP), the item changes as follows:

Clock nCT nD.Info* nAmber/Green n

Dimmer nContrast nVoice* nBeep n

RM nLoud* nLPF* nA.Scrl*

*When the radio is off, or when there is no CD or MD being played, these items will not appear.

Notes

•The displayed item will differ depending on the source.

•If an optional digital preamplifier is connected to the unit, Voice Guide does not work.

3 Press (5) (n) to select the desired setting (for example: on or off).

For the “Contrast” setting, pressing (5) (n) makes the contrast higher, and pressing (2) (N) makes the contrast lower.

4 Press (SHIFT).

After the mode setting is complete, the display returns to normal playback mode.

Adjusting the frequency of the subwoofer(s)

To match the characteristics of the connected subwoofer(s), you can cut out the unwanted high and middle frequency signals entering the subwoofer(s). By setting the cut-off frequency, the subwoofer(s) will output only low frequency signals for a clearer sound image.

1 Press (SOURCE) to select a source (tuner,

CD, or MD).

2 Press (SHIFT), then press (3) (SET UP) repeatedly until “LPF” appears.

3 Press (5) (n) or (2) (N) repeatedly to select the desired setting.

SET UP

Each time you press (5) (n) or (2) (N), the cut-off frequency in the display changes as follows:

LPF off ÷LPF 80 Hz ÷LPF 120 Hz

4 Press (SHIFT).

When the frequency setting is complete, the display returns to the normal playback mode.

EN

Functions Other

27