Adjusting the sound characteristics

You can adjust the bass, treble, balance, and fader.

You can store the bass and treble levels independently for each source.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nSUB (subwoofer volume)

nBAS (bass) nTRE (treble)

nBAL (left-right) nFAD (rear-front)

2 Adjust the selected item by rotating the dial.

Adjust within three seconds after selecting the item. (After three seconds, the dial function reverts to volume control.)

EN

Attenuating the sound

Press (ATT) on the rotary commander or optional wireless remote.

“ATT on” flashes momentarily.

To restore the previous volume level, press (ATT) again.

Tip

The unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Changing the sound and display settings

The follow items can be set: •Clock (page 7).

•CT (Clock Time) (page 21).

•D.Info (Dual Information) – to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•Amber/Green – to change the illumination colour to amber or green.

•Dimmer – to change the brightness of the display.

Select “Auto” to dim the display only when you turn the lights on.

Select “on” to dim the display.

Select “off” deactivate the Dimmer. •Contrast – to adjust the contrast if the

indications in the display are not recognizable because of the unit‘s installed position.

•Voice guide function for vocalized comments.

Select “Voice 1” to minimize the volume of the guide.

Select “Voice 2” to increase the volume than “Voice 1.”

Select “Voice 3” to maximize the volume of the guide.

Select “Voice off” to deactivate Voice guide.

•Beep – to turn the beep sound on or off. •RM (Rotary Commander) – to change the operative direction of the controls of the

rotary commander.

Select “norm” to use the rotary commander in the factory-set position.

Select “rev” when you mount the rotary commander on the right side of the steering column.

•Loud (Loudness) – to enjoy bass and treble even at low volume. The bass and treble will be reinforced.

•LPF (Low Pass Filter) (page 27).

•A.Scrl (Auto Scroll) (page 9, 28).

26