Setting the time

1 Turn on the system.2 Press CLOCK/TIMER SET.

When you set the time for the first time, proceed to step 5.

3 Press . or > repeatedly to select “CLOCK SET”.4 Press ENTER.5 Press . or > repeatedly to set the hour.6 Press ENTER.7 Press . or > repeatedly to set the minutes.8 Press ENTER.

Tips

•If you have made a mistake or want to change the time, start over from step 2.

•You can use the digipad instead of ./>.

Note

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

Saving the power in

standby mode

Press DISPLAY repeatedly when the power is off.

Each time you press the button, the system switches cyclically as follows:

Demonstration t Clock t Power Saving Mode

To cancel the Power Saving Mode

Press DISPLAY once to show the demonstration, twice to show the clock display.

Tips

•?/1 indicator lights up even in the Power Saving Mode.

•The timer functions during the Power Saving Mode.

Note

During the Power Saving Mode, the following functions do not work:

–Setting the time.

–Changing the AM tuning interval (except for European and Middle Eastern models).

–Pressing a function button to turn the power on.

–Switching the function of MD (VIDEO).

Started Getting

11