Recording to a tape

––CD Synchro Recording/High-Speed Dubbing/Recording Manually/Program Edit

You can record from a CD, tape, radio or other connected component. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically.

Steps

Recording from a CD

Recording from a tape

Recording Manually

(CD Synchro Recording)

(High-Speed Dubbing)

 

 

 

 

 

 

 

 

1

Insert a recordable tape into deck B.

 

 

 

 

 

 

 

2

Press CD.

Press TAPE A/B repeatedly

 

Press a function button

 

 

to select TAPE A function.

for the recording

 

 

 

 

 

source.

 

 

 

 

 

 

3

Insert the CD you want to

Insert the tape you want to

 

Insert the CD/tape, or

 

record.

record into deck A.

 

tune in the station you

 

 

 

 

 

want to record.

 

 

 

 

 

 

4

Press CD SYNC HI-DUB.

 

 

 

Press REC PAUSE/

 

 

 

 

 

START.

 

Deck B stands by for recording.

 

 

 

 

 

The REC PAUSE/START button flashes.

 

 

To reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that “DOLBY

 

NR” appears in the display (except when recording from a tape).

 

 

 

 

5

Press DIRECTION repeatedly to select g to record on one side.

 

Select j (or RELAY) to record on both sides.

 

6

Press REC PAUSE/START.

 

 

 

 

 

Recording starts.

 

 

 

 

7

 

 

 

 

Start playing the

 

 

 

 

recording source.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes

 

To

Press

 

 

 

 

 

 

Stop recording

x.

Pause recording*

REC PAUSE/START.

* Only when recording manually.

Tips

•If you want to record from the reverse side, press TAPE A/B to select deck B and press nN to start playback of the reverse side after step 1. Press x where you want to start recording.

•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

•(High-Speed Dubbing only)

If you set direction to j when the tapes have different lengths, the tapes in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together.

•You cannot listen to other sources while recording.

•You cannot use the digipad during recording.

•If you change the setting of sound, such as changing the preset effect file, while recording, the recording sound is interrupted at the point.

•If you start recording with the 2CH/MULTI set to V.SEMI M.D., MULTI, or V.M.DIMENS., the setting automatically changes to 2CH.

18