Setting up your speakers

for Dolby Pro Logic

(MHC-DP800AV only)

Dolby Pro Logic Surround improves the sound image by using four separate channels. These channels manipulate the sound to be heard and enhance the action on the screen.

Positioning the speakers1 Place the front speakers at an angle of45 degrees from your listening position.

Front

Center

Front

speaker

speaker (L)

speaker (R)

 

45°

 

Rear

 

Rear

speaker (L)

 

speaker (R)

2 Place the center speaker at about the same height as the front speakers. Align the center speaker with the front speakers or place it slightly behind the front speakers.

3 Place the rear speakers facing each other at about 60 to 90 cm above your listening position.

Rear speaker

60 to 90 cm

Specifying the distance of the speakers

Use the remote for the operation.

1 Press AMP MENU.

2 From your listening position, press v or V repeatedly to select the parameter.

Adjustable parameters are described below.

3 Press b or B repeatedly to select the setting you want.4 Repeat steps 2 to 3 to set other parameters.5 Press ENTER.

Tip

You can use the digipad instead of the cursor buttons (v/V/b/B).

Note

If each of the front or rear speakers is not placed at an equal distance from your listening position, set the distance of the closest speaker.

Adjustable parameters

The default settings are in the parentheses.

•FRNT: 1.0 meter to 12.0 meters (2.4 meters) (3 feet to 40 feet (8 feet))*

Front speakers distance.

• CTR: FRNT to 1.5 meters (2.4 meters) (FRNT to 5 feet (8 feet))*

Center speaker distance.

•REAR: FRNT to 4.5 meters (1.5 meters) (FRNT to 15 feet (5 feet))*

Rear speakers distance.

* North American model only.

Note

To enjoy Dolby Pro Logic surround with 2 channel PCM or analog input sources, select “NORMAL SURR” from the sound effect options (see page 21).

Started Getting

9