Hooking up the system (continued)
3Connect the center speaker. (MHC-DP800AV only)
Connect the speaker cords to the CENTER SPEAKER jacks.
Insert only the stripped portion.
+ | R | L |
| ||
|
| |
|
| + |
Gray/Solid (3) |
| – |
|
| |
|
| Black/Stripe (#) |
4Connect the FM/AM antennas.
Set up the AM loop antenna, then connect it.
Jack type A
Extend the FM lead
AM loop antenna antenna horizontally.
FM75
AM
Jack type B
Extend the FM lead antenna horizontally.
AM loop antenna
FM75
COAXIAL
AM
The plug of the FM antenna may vary according to the model you purchased.
5For models with a voltage selector, set VOLTAGE SELECTOR to the position of your local power line voltage.
VOLTAGE SELECTOR
120V 220V
6Connect the power cord to a wall outlet.
The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends.
If the supplied adaptor on the plug does not fit your wall outlet, detach it from the plug
8 (only for models equipped with an adaptor).
To attach the speaker pads
Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.
Notes
•Keep the speaker cords away from the antennas to prevent noise.
•The type of speakers supplied vary according to the model you purchased (see “Specifications” on page 30).
•Do not place the rear speakers on top of a TV. This may cause color distortion in the TV screen.
•For
Inserting two size AA (R6)
batteries into the remote
| ] | |
} | } | |
] | ||
|
Tip
When the remote no longer operates the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
Notice for carrying this system
Do the following to protect the CD mechanism.
1Turn on the system, then press CD. Make sure that all discs are removed from the unit.
2Hold down CD, then press ?/1 until “LOCK” appears.
3Release ?/1 first, then release CD.
4Unplug the AC power cord.