Setting the clock

Use buttons on the remote for the operation.

1 Press ?/1 to turn on the system.2 Press CLOCK/TIMER SET.

“CLOCK” appears in the display. Then, the hour indication flashes in the display.

3 Press –.or >+ repeatedly to set the hour.4 Press ENTER.

The minute indication flashes in the display.

5 Press –.or >+ repeatedly to set the minute.6 Press ENTER.

The clock starts functioning.

To adjust the clock

1Press CLOCK/TIMER SET.

“SET” appears in the display, then “PLAY SET?” flashes in the display.

2Press –.or >+ repeatedly to select “CLOCK SET?”, then press ENTER. The hour indication flashes in the display.

3Do the same procedures as step 3 to 6 above.

Notes

•The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

•You cannot set the clock in Power Saving Mode (page 36).

Started Getting

13GB