Tape – Recording
Recording your favorite tracks on a disc into a tape
— CD Synchro Recording
You can record a whole disc into a tape. You can use TYPE I (normal) tape. The recording level is adjusted automatically.
1 Load a recordable tape into Deck B.
2 Press CD and load a disc you want to record.
When you want to record an album of MP3 audio tracks, press PLAY MODE on the remote repeatedly until “ALBM” lights up in the display. Then turn and hold ALBUM +/– clockwise or counterclockwise and release it at the album you want (or press ALBUM +/– on the remote repeatedly).
3 Press CD SYNC.
“SYNC” lights up in the display. “REC” flashes in the display. Deck B standby for recording.
4 Press DIRECTION repeatedly to select “g” to record on one side or “j” (or “RELAY”) to record on both sides.
5 Press REC PAUSE/START.
“REC” lights up in the display. Recording starts.
To stop recording
Press x.
To record a disc by specifying track order
— Program Edit
You can record tracks on all the discs in the order you want using Program Play. Between steps 2 and step 3 of “CD Synchro Recording” (page 24), do steps 2 to 6 of “Creating your own program” (page 17). When programming, make sure the playing times for each side do not exceed the length of one side of the tape.
Note
You cannot listen to other sources while recording.
Tips
•For recording from the reverse side:
After step 1, press TAPE A/B (or TAPE on the remote) repeatedly until “TAPE B” appears in the display. Press nN (or N on the remote) repeatedly until TAPE B reverse side indicator “b” lights up in the display to start playback of the reverse side. Press x at the point you want to start recording.
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.