Adjusting the graphic equalizer or selecting the surround effect
You can adjust the sound by raising or lowering the level of specific frequency band, then store up to three user equalizer setting in the memory.
1 Press EQ BAND repeatedly to select a frequency band or surround effect.
2 Turn OPERATION DIAL clockwise or counterclockwise to adjust the level or select surround effect you want.
Frequency band | Frequency level | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other operations
To | Do this |
Call up a user | Turn OPERATION DIAL |
equalizer setting | clockwise or counterclockwise |
| until the user equalizer setting |
| number you want appears in the |
| display. |
|
|
Each time you press the button, the display changes cyclically as follows:
SURROUND ON t SURROUND OFF
Notes
•When you select certain preset effects, the surround effect may be canceled.
•When the surround effect is selected, “SURROUND” lights up in the display.
4 Press ENTER.
A user equalizer number flashes in the display.
5 Turn OPERATION DIAL clockwise or counterclockwise to select a user equalizer number (1~3) you want to store the equalizer setting.
6 Press ENTER.
This setting is automatically stored as the user equalizer setting you selected in step 5. The previous setting stored at this memory location is erased and replaced by the new setting.
Tip
If you do not want to store the equalizer setting, select “EXIT?” in step 5.