Waving the equalizer

— Wave

With the Wave function, you can fluctuate the graphic equalizer automatically. This effect can be used with any source, but it cannot be recorded.

POWER WAVE

jog dial

0 )

Æ‚

Using the drum pads

With the drum pads, you can add percussion during playback. This effect can be used with any source, to create original recordings.

PAD A/

jog dial

 

POWER PAD B

 

0 )

 

 

Æ‚

CHAIN

LEVEL +/–

/Press and hold WAVE to start the Wave function, and release to resume normal listening.

To adjust the wave length

Turn the jog dial while holding WAVE to select a different wave length (WAVE 1~10).

/Tap drum pad A or B to produce the respective sound.

To change the drum sound

Press and hold down pad A or B and turn the jog dial to select the sound you desire. You can select from 21 different drum sounds. The name of the drum sound appears in the display.

KICK˜ SNARE˜ . . . ˜SCRATCH PUSH

n

n

The sound you select will be stored in pad A or B.

To create a drum roll

Turn the jog dial while holding down CHAIN. You can vary the speed of the drums by turning the jog dial counterclockwise (for pad A) or clockwise (for pad B).

To adjust the volume of the pads

Press LEVEL + or –.

Note

When the APPLAUSE MIX function is selected, you will not hear the drum pad during the applause.

27

Page 27
Image 27
Sony MHC-GR8 manual Waving the equalizer, Using the drum pads, Wave