Sony MHC-GR8 manual Timer-recordingradio programs continued, Set the time to start recording

Timer-recording radio programs (continued)

3 Turn jog dial to select REC, then press ENTER/NEXT.

“ON” appears and the hour digits flash in the display.

REC

VOLUME

4 Set the time to start recording.

Turn jog dial to set the hour, then press

ENTER/NEXT.

The minute indication starts flashing.

REC

VOLUME

Turn jog dial to set the minute, then press ENTER/NEXT.

The hour indication flashes again.

5 Set the time to stop recording following the above procedure.

The start time appears, followed by the stop time, the recording source and the radio station, then the original display appears.

6 Insert a recordable tape.

7 Turn off the power.

When the recording starts, the volume level is set to the minimum.

To check the setting

Press TIMER SELECT and turn the jog dial to select “REC”, then press ENTER/NEXT. To change the setting, start over from step 1.

To cancel the timer operation

Press TIMER SELECT and turn the jog dial to select “OFF”, then press ENTER/NEXT.

Notes

•When setting the timer-recording, set the equalizer display to anything other than Spectrum analyzer pattern 3 (see “To change the equalizer display” on page 31).

•If the power is on at the preset time, the recording will not be made.

40