Sony MHC-RX90 manual Playing a CD continued, Tips, Do this

Playing a CD (continued)

To	Do this
Stop play	Press	(p on the remote).
Pause	Press ·	(P on the remote).
	Press again to resume play.
Select a track	During play or pause, turn the
	jog dial clockwise (to go
	forward) or counterclockwise
	(to go back) and release it
	when you reach the desired
	track. Or press + (to go
	forward) or = (to go back)
	on the remote.
Find a point in	Press and hold down ) or
a track	0 ( o r	) / 0 o n t h e
	remote) during play and
	release it at the desired point.
Select a CD	Press a DISC 1~3 button or
in stop mode	DISC SKIP EX-CHANGE.
Play only the	Press 1/ALL DISCS
CD you have	repeatedly until “1 DISC”
selected	appears.
Play all CDs	Press 1/ALL DISCS repeatedly
	until “ALL DISCS” appears.
Remove the CD	Press § OPEN/CLOSE.
Exchange other	Press DISC SKIP
CDs while	EX-CHANGE.
playing
Adjust the	Turn VOLUME (or press VOL
volume	+/– on the remote).

Tips

•Pressing · when the power is off automatically turns the power on and starts CD playback if there is a CD in the tray (One Touch Play).

•You can switch from another source to the CD player and start playing a CD just by pressing

· or the DISC 1~3 buttons (Automatic Source Selection).

•If there is no CD in the player, “CD NO DISC” appears in the display.

•When a disc tray is selected or the CD placed on that tray is playing, the DISC 1~3 button for the respective tray lights green.

12