Recording from a tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted.
REPEAT/DOLBY NR
POWER 3
0 | ) | „ |
⁄Æ‚
|
| … | … |
|
|
» | Æ | „ | „ | » | Æ |
⁄ | ⁄ |
1 2 4 1
1 Press § EJECT and insert a recorded tape in deck A and a blank tape in deck B.
With the side |
| … |
» | Æ | |
you want to |
| � |
play/record |
|
|
facing forward |
|
|
|
| ⁄ |
2 Press HIGH SPEED DUBBING.
Deck B stands by for recording.
3 Press EDIT/DIRECTION repeatedly to select A to record on one side. Select a (or RELAY) to record on both sides.
4 Press .
Dubbing starts.
To stop dubbing
Press on deck A or B.
Tips
•When you dub on both sides, start recording from the front side. If you record from the reverse side, recording stops at the end of the reverse side.
•If you set EDIT/DIRECTION to a when the tapes you use have different lengths, the tape in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together.
•You don’t have to set REPEAT/DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A.
18
