Recording a CD
— CD Synchro Recording
The CD SYNCHRO button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically.
DISC SKIP | 4 | 2 |
POWER | ||
0 ) |
| „ |
⁄ Æ‚
|
| … | … |
|
|
» | Æ | „ | „ | » | Æ |
⁄ | ⁄ |
REPEAT/ | 3 | 5 | 1 |
DOLBY NR |
1 Press § EJECT and insert a blank tape into deck B.
With the side |
|
|
you want to | Æ | » |
record facing | � |
|
forward |
|
|
|
| ⁄ |
2 Press § OPEN/CLOSE and place a CD.
Then press again to close the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP
With the label | 0 ) | „ |
| ⁄ | Æ‚ |
side up. When |
|
|
you play a single |
|
|
CD, place it on |
|
|
the inner circle |
|
|
of the tray. |
|
|
3 Press CD SYNCHRO.
Deck B stands by for recording and the CD player stands by for playback. · (for front side) lights up.
4 Press EDIT/DIRECTION repeatedly to select A to record on one side. Select a (or RELAY) to record on both sides.
5 Press on deck B. Recording starts.
To stop recording
Press on deck B or on the CD player.
Tips
•If you want to record from the reverse side, press ª so that ª (for reverse side) lights up.
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•When you want to reduce the hiss noise in low- level
Note
You cannot listen to other sources while recording.
Basic Operations
13